Library Configuration; License Registration; Verification Of Library Connection - Sony FSV-VN7 Installation Manual

3-3. Library Configuration

3-3-1. License Registration

Select [Setup] → [License].
The following window appears.
Type the serial number and the license key of FZLH16AL
(License sheet) or FZLH20SL (SAIT Library Licence) into
Serial and Code of License List respectively.
Then click on the "Add" button to register the license
information.
When another AIT library or SAIT library is connected,
add the given Serial and Code of License to the Lists.
If an incorrect Serial or Code is entered, an error message
is displayed In this case, check if the value is properly
typed in. (Refer to Section 4.)
FSV-VN7/CS7

3-3-2. Verification of Library Connection

Click on the [Setup] → [Library Configuration] icon.
(The window shows the case of the CSM-20 (SAIT
Library.))
When a Library with two AIT drives is connected success-
fully, all the devices should be displayed as shown in the
example above.
Check the Device List status and click on the "run library
configuration" button to complete the device configuration.
n
When another AIT library or SAIT library is connected,
the status for the new devices is displayed in the Device
List.
If the Device List is shown in red, the license information
may not have been registered correctly.
Check the license registration again.
3-9