Table of Contents
Advertisement
4. System language setting
1.
Webmin language setting (Default : English).
Select [Webmin] - [Webmin Configuration] -
[Language], the following window appears.
Select the preferred language by pulldown menu and
click the "Change Language" button.
2.
Samba (Server software of SMB protocol) Client code
page setting (Default code : 932)
Select [Servers] - [Windows File Sharing] -
[GLOBALS].
Client code for Samba needs to be set to the language
for each country. Input a code (refer to the following
Language Code Table) in the "dos charset" box and
click "Save" button.
w
When setting "dos charset" to a code other than
"CP932", set "unix charset" and "display"charset to
UTF8.
FSV-VN7/CS7
Language Code Table
Language
Code
USA
CP437
Greek
CP737
Western European
CP850
MS-DOS Latin 2
CP852
Icelandic
CP861
Cyrillic
CP866
Kanji SJIS (default)
CP932
Simplified Chinese
CP936
Hangul
CP949
Traditional Chinese
CP950
5. Network Setup
n
Do not use "setup" and "netconfig" command of the Main
Server to change the network settings, otherwise the
system may fall into malfunction.
Select [System] - [IP Address Configuration]. The follow-
ing screen will appear.
Set to a proper address in each box and click "Change
global network settings" button.
n
Network address can be changed by updating the configu-
ration file by manual. (Refer to 5-2 IP Address change by
command line of Appendix)
3-7
Advertisement
Table of Contents
