Table of Contents
Advertisement
INTRODUCTION
Letters in brackets
The letters in brackets refer to the legend in the Description of
the appliance.
Troubleshooting and repairs
In the event of problems, follow the information given in the
sections "Displayed messages" and "Troubleshooting".
If this does not resolve the problem, you should consult customer
services. For repairs, contact customer services only.
Instruction for Use
Read this Instruction for Use carefully before using the appliance.
•
Keep this Instruction for Use.
•
Failure to follow this Instruction for Use may result in burns
or damage to the appliance. The manufacturer is not liable
for damage deriving from failure to respect this Instruction
for Use.
The appliance has a cooling fan. This remains active while the
machine is on.
DESCRIPTION OF THE APPLIANCE
Description of the appliance
(page 5 - A)
A1. Cup tray
A2. Service door
A3. Co ee guide
A4. Co ee grounds container
A5. Infuser
A6. Interior lighting
A7. On/OFF/stand-by button
A8. Control panel
A9. Tray for objects
A10. Hot water/steam connection nozzle
A12. Water tank
A13. Co ee spouts (adjustable height)
A14. Drip tray
A15. Beans container lid
A16. Beans container
A17. Grinding adjustment dial
A18. Cup lights
A19. Main switch
A20. Measure compartment
A21. Pre-ground co ee funnel
A22. Power cord
A23. Cup warmer
Description of the homepage (main screen)
(page 6 - B)
B1.
: menu to customise the beverages settings
B2.
: appliance settings menu
B3. Selected aroma
B4. Clock
B5. Selected quantity
B6.
: aroma selection
B7.
: quantity selection
B8.
: scroll arrow
B9. Beverages available for selection (press the
scroll arrows to display all the beverages, the bottom bar
indicates which screen you are viewing)
B10.
: scroll arrow
B11. Customisable pro les (see "Memorising your personal pro le")
Description of the accessories
(page 6 - C)
C1. "Total Hardness Test" indicator paper
C2. Ground co ee measure
C3. Cleaning brush
C4. Hot water/steam spout
C5. Connection nozzle cover
Description of the milk container
(page 6 - D)
D1. Froth adjustment and CLEAN dial
D2. Lid with milk frother
D3. Milk container
D4. Milk intake tube
D5. Frothed milk spout (adjustable)
D6. Thermal casing
D7. Lid release buttons
BEFORE USE
Checking the appliance
After removing the packaging, make sure the product is complete
and undamaged and that all accessories are present. Do not use
the appliance if it is visibly damaged. Contact customer services.
SETTING UP THE APPLIANCE
•
Co ee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of co ee
in the mill. The machine is, however, guaranteed to be new.
•
You should customise water hardness as soon as possible
following the instructions in section "Setting water hard-
ness".
1. Connect the appliance to the mains electricity supply ( g.
1) and make sure the main switch (A19) on the side of the
15
EN
or
Advertisement
Table of Contents
Troubleshooting
