Whirlpool 400011239758 Instructions For Use Manual page 28

DISPLAYED MESSAGE
ADD PRE-GROUND COFFEE
MAXIMUM ONE MEASURE
ADD PRE-GROUND COFFEE
MAXIMUM ONE MEASURE
FILL BEANS CONTAINER
GROUND TOO FINE. ADJUST
MILL 1 CLICK WHILE IN
OPERATION
POSSIBLE CAUSE
The "pre-ground co ee" function has
been selected without placing any pre-
ground co ee in the funnel (A21).
The pre-ground co ee funnel (A21) is
clogged.
A LONG co ee with pre-ground co ee has
been requested
The co ee beans have run out.
The grinding is too ne and the co ee is
delivered too slowly or not at all.
REMEDY
Place pre-ground co ee in the funnel ( g. 14) and
repeat delivery
Empty the funnel with the help of the brush (C3) as
described in section "Cleaning the pre-ground
co ee funnel".
Place pre-ground co ee in the funnel (A21) ( g.
14) and press
delivery.
Fill the beans container (A16 - g. 12).
Repeat co ee delivery and turn the grinding adjust-
ment dial (A17) one click clockwise towards "7" while
the co ee mill is in operation. If after making at least
2 co ees delivery is still too slow, repeat the correc-
tion procedure, turning the grinding adjustment dial
another click until delivery is correct (see section
"Adjusting the co ee mill"). If the problem persists,
make sure the water tank (A12) is fully inserted.
Insert the hot water/steam spout (C4) in the appli-
ance and deliver a little water until the ow becomes
regular.
28
to continue and complete