Hdmi Troubleshooting - Pioneer VSX-2016AV-S Service Manual

1

7.1.4 HDMI TROUBLESHOOTING

QQ
3 7 63 1515 0
A
HDMI Simple Diagnosis
Please refer to the one point trouble shooting first before checking the flow chart on the next page.
HDMI
Symptom
The HDMI indicator blinks
continuously.
No picture or sound.
B
No picture.
No sound, or sound suddenly
ceases.
Noisy or distorted picture.
C
1. Causes for noncompletion of HDMI authentication between the source equipment and this unit
(the HDMI indicator is unlit or flashes)
Replace the HDMI cable.
TE
L 13942296513
NG
Replace the Receiver.
D
NG
Replace the Player.
2. Causes for noncompletion of HDMI authentication between the monitor and this unit
(no display or sound from the monitor)
E
Replace the HDMI cable.
NG
Replace the Receiver.
www
NG
F
Replace the TV monitor.
216
1
http://www.xiaoyu163.com
2
Remedy
Check all the points below.
• This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-
compatible. If they are not, please connect them using the component, S-video or composite video jacks.
• Depending on the connected source component, itís possible that it will not work with this receiver (even
if it is HDCP-compatible). In this case, connect using the component, S-video or composite video jacks
between source and receiver.
• If the problem still persists when connecting your HDMI component directly to your monitor, please
consult the component or monitor manual or contact the manufacturer for support.
• To see the on-screen display, you must also connect the receiver and TV with a composite, component,
or S-video cable.
• Depending in the output settings of the source component, it may be outputting a video format that can't
be displayed. Change the output settings of the source, or connect using the component, S-video or
composite jacks.
• Check that the HDMI AV setting is set to AMP/THROUGH.
• If the component is a DVI device, use a separate connection for the audio.
• Check the audio output settings of the source component.
• If the problem still persists when connecting your HDMI component directly to your monitor, please
consult the component or monitor manual or contact the manufacturer for support.
OK
Replace the HDMI cable.
OK
Repare the Receiver.
OK
Repare the Player.
OK
Replace the HDMI cable.
OK
Repare the Receiver.
x ao
y
. i
OK
Repare the TV monitor.
VSX-2016AV-S
2
http://www.xiaoyu163.com
3
8
Q Q
3 6 7 1 3
u163
.
3
4
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
4
9 9
2 8 9 9