Hdmi Troubleshooting - Pioneer VSX-917V-K Service Manual

5

7.1.2 HDMI TROUBLESHOOTING

HDMI Simple Diagnosis
Please refer to the one point trouble shooting first before checking the flow chart on the next page.
HDMI
Symptom
No picture or sound.
No picture.
No sound, or sound suddenly
ceases.
Causes for no display or sound from the monitor
Replace the HDMI cable.
NG
Connect the source equipment
(player) to the Sink equipment
(monitor) directly.
NG
Replace the Player.
NG
Replace the Monitor.
5
6
Remedy
• If the problem still persists when connecting your HDMI component directly to your monitor, please
consult the component or monitor manual or contact the manufacturer for support.
• Depending in the output settings of the source component, it may be outputting a video format that can't
be displayed. Change the output settings of the source, or connect using the component, S-video or
composite jacks.
• Since the HDMI audio signal is sent through this receiver to your TV, you need to make separate
connections for audio if you want to hear your HDMI component through this system.
• If you've made separate connections for audio, make sure you have assigned the analog/digital jack(s) to
the corresponding HDMI input for the component.
• Check the audio output settings of the source component.
OK
OK
OK
OK
6
7
Replace the HDMI cable.
Repare the Receiver.
Repare the Player.
Repare the Monitor.
VSX-917V-K
7
8
A
B
C
D
E
F
111
8