Table of Contents
Advertisement
AXIS Q1700-LE License Plate Camera
Setup
Reduce noise in low-light conditions
To reduce noise in low-light conditions, you can adjust one or more of the following settings:
•
Set the exposure mode to automatic.
Note
A high max shutter value can result in motion blur.
•
To slow down the shutter speed, set max shutter to the highest possible value.
•
Reduce sharpness in the image.
•
Set the max gain to a lower value.
Maximize details in an image
Important
If you maximize details in an image, the bitrate will probably increase and you might get a reduced frame rate.
•
Set the compression as low as possible.
•
Select MJPEG streaming.
•
Turn off Zipstream functionality.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
1. Go to Settings > Image > Wide dynamic range.
2. If required, turn on WDR.
Image without WDR.
10
Hide quick links:
Advertisement
Table of Contents
