Table of Contents
Advertisement
Functions
ON/SPEED
To turn the unit "on", press the ON/SPEED button. The unit will automatically start
in medium speed. Each time the button is pressed, the speed increases from low to
medium, and then to high.
The power indicator light on the control panel illuminates as speed increases.
The ON/SPEED button only switches "on" the fan function, not the MIST function.
OFF
Press the OFF button at anytime to switch "off" the unit.
AMBIENT TEMPERATURE
The unit will display the room temperature when the unit is switched "on".
TIMER
Each time the TIMER button is pressed, the time increases in 0.5hr increments to a
MAX of 10 hours. To cancel the TIMER function, keep pressing the button until the
time is cancelled and the ambient room temperature is displayed.
MIST FUNCTION
To start the MIST function, press the MIST button and the snowflake icon will
illuminate. Adjust the mist output by the mist adjuster dial. The MIST function
operates independently, so the MIST function must be cancelled/turned off, prior to
turning the enitre unit OFF.
SWING
Press this button to choose between either a fixed or swinging airflow. Press the
SWING button to activate this function, press it again to turn off the SWING.
REMOTE CONTROL
This unit comes with a full functioning remote control. The remote requires batteries.
The effective range is approximately 6m.
ICE PACK
An ICE PACK is included underneath the water tank. Remove it and fill it 90% full of
water and shake so the gel and water combines. Place the ICE PACK in the freezer
overnight. Once frozen put the ICE PACK back into position under the water tank
and press the MIST button to enhance the cooling effect.
NOTE: The ICE PACK is reusable. DO NOT empty the contents after the initial fill. Do
consume the contents of the ICE PACK. Children should be supervised so they do
not place with the ICE PACK.
8
Advertisement
Table of Contents
