Lionel 70-2784-250 Manual

LIONEL
®
C
ongratulations on your purchase of the Lionel freight platform.
Before you begin to build the structure, look over these instructions
carefully. When assembling the walls, match the numbers as shown on
the diagram. Following the procedures given, snap the structure's parts
together. No cementing is required. Before joining parts, trim off excess
FREIGHT PLATFORM
When assembling the walls,
match the numbers as shown
4
plastic "flash" with a modeler's knife. Lionel uses the highest quality of
styrene plastic to make its model kits. If permanent assembly is pre-
ferred, only cement and paint made for styrene should be used. To join
parts, use cement sparingly, using care not to get cement on exposed
areas. Apply cement to very small parts with a toothpick.
2 2
70-2784-250
Rev. 12/96