Operating Conditions - Sony XDCAM PDW-HD1200 Installation Manual

1-3. Operating Conditions

c
Do not block an air vent. If ventilation is not enough, the unit may be damaged due to increase of the
internal temperature of the unit.
. Do not shove the unit into a cramped place with poor ventilation.
. Be sure to make cleaning if a cooling fan or air vent is covered with dust.
. Do not turn over the unit or place the unit on its side.
. Do not place the unit on a longhaired carpet.
. Do not cover the unit with cloth.
n
Good air circulation is essential to prevent internal heat build-up. Place the unit in location with suffi cient
air circulation.
Do not block the ventilation holes of the cabinet and the front and rear panels.
Operating temperature: 5 dC to 40 dC
Operating humidity: 25 % to 90 % (Condensation not allowed)
_20 dC to 60 dC
Storage temperature:
. Areas where the unit will be exposed to direct sunlight of any other strong
Locations to avoid:
lights.
. Areas near heat sources.
. Dusty areas or areas subject to vibration.
. Areas with strong magnetic fi eld.
. Areas with much electrical noise.
. Areas with much static electricity.
. Areas that is impossible to fi nd a specifi ed room for installation.
(Refer to Section "1-5. Installation Space" .)
. Areas windtight.
1-2 (E)
PDW-HD1200