Table of Contents
Advertisement
1-6. Connectors/Cables
When external cables are connected to the connectors of this unit, the hardware listed below (or equiva-
lents) must be used:
Panel indication
REF. VIDEO INPUT
COMPOSITE OUT
TIME CODE IN
TIME CODE OUT
SDSDI OUTPUT
SD/HDSDI INPUT
HDSDI OUTPUT
ANALOG AUDIO INPUT
ANALOG AUDIO OUTPUT
AUDIO MONITOR
DC IN
REMOTE
REMOTE (9P)
HDMI OUT
PHONES
S400 (i.LINK)
(NETWORK)
PDW-HD1200
Connection connector (Sony P/N)
Plug, BNC, 75 Z
Plug, BNC, 75 Z
Plug, BNC, 75 Z
XLR 3P, MALE (1-508-084-00)
XLR 3P, FEMALE (1-508-083-00)
XLR 4P, FEMALE (1-508-362-00)
Plug 4P MALE (1-566-425-11)
D-sub 9P MALE
HDMI type A
JM-60 stereo phone plug (commer-
cially available)
IEEE1394 6P
RJ-45 8P
Connection cable (Sony P/N)
BELDEN 8281 cable or equivalent
BELDEN 8281 cable or equivalent
Maximum cable length: 200 m
(Reference value based on DNW series)
BELDEN 1694A cable or equivalent
Maximum cable length: 100 m
(Reference value based on HDW series)
_
_
DC power cord (1-551-577-00: supplied
with AC-550/550CE)
_
9P remote control cable (RCC-G series
RCC-5G (5 m)/10G (10 m)/30G (30 m))
Use the HDMI cable (with plug) that is
commercially available on market.
_
STP cable is recommended.
(STP: Shielded Twist Pair)
1000BASE-T standard conformity article
UTP cable is recommended.
(UTP: Unshielded Twist Pair)
1-7 (E)
Advertisement
Table of Contents
