Operating Time Edit - Sony CDP-311 Operating Instructions Manual

Designating the Vi
Total Playing Time
1
EOIT/TIME FADE
th
3
EDIT/TIME FADE
na ina)
18
You can designate a playing time and the
unit will make 2 different programs of
selections each fitting within that period.
These programs can contain up to a total of
24 selections.
Use this function, by designating the length
of your tape. for editing both sides of a
tape.
This function, called time edit, sets the
playing time of each program within the
designated time automatically, by choosing
selections in numerical order which
changes as little as possible.
You can also program desired selections by
priority. In this case, you can designate
desired selections beforehand and the
remaining selections will be programmed to
fit in the remaining time.
Operating Time Edit
1 Press EDIT/TIME FADE and display
"EDIT".
2 Designate the length of one side of
your tape.
a) When you specify a commercially
available tape length:
Each time you press I««4 «4 or
bb P», the display changes to give
you the following durations :
nos C-46-——- C-54-—~ C-60
{2300 mm) (2700mei — (3000 me)
sae — 0-90 -— C-74
145 00 mend —— (3? 00 ee
When you select HALF, you can divide
ail the selections of the disc into two
programs without changing their order.
b) When setting your desired time:
Use the numeric buttons. Press [1] for
"0". It is generally not necessary to
press numeric buttons for seconds.
Note
HALF cannot be set on a disc with more
than 20 selections.
3 Press EDIT/TIME FADE.
The selections for side A are determined
automatically.
a) The last selection to be recorded,
b) Total playing time and
c) Selections to be recorded on side A
appear.
(to be continued)