Table of Contents
Advertisement
1-5-3. Rack Mounting
Notes on Rack Mounting
. A rise in temperature inside the rack due to a residual heat by neighboring units will bad effects on the
unit. Check that the temperature inside the rack is within the range of specifi ed operating temperature of
the unit.
. Do not cover the exhaust port or ventilation holes (lower front, right and left sides).
. When installing units side by side, leave 1 cm or more of space to the both side of each this unit.
Blocking the air intake will damage the unit.
. Leave 25 cm or more of space to the rear of the unit.
. Use a commercially available rack mount kit.
Select an appropriate shelf taking size and weight of the unit into consideration.
. Never remove the top and bottom panels, handle, or legs of the unit when installing.
. Use adequately long cables for connection of the connector panel, considering that the unit is pulled out
from the rack.
n
After rack mounting, check that the temperature inside the rack is within the range of 5 dC through 35 dC.
1-6 (E)
PDW-HD1200
Advertisement
Table of Contents
