Summary of Contents for pitsco AP Dragster Launcher
Page 1
AP Dragster Launcher User Guide 59893 V0810...
Page 2
2) Place the AP Dragster Launcher where you want the start of the race to be. The brass tubes should be pointing down the race track. Measure the length of track you want – it should be between 20 and 40 feet long (40 is preferred;...
Page 3
(Figure 5). Replace the loop over the post. 3) Repeat this on the second track string Figure 5 with the other dragster. AP Dragster Launcher User Guide 59893 V0810...
Page 4
– either unhook the string loop from the paper clip at the finish plate or unhook the loop over the post on the launcher. Replacing the Brass Tubes If the brass tubes on your AP Dragster Launcher become bent, they can be removed and replaced with the two brass replacement tubes that came with the launcher.
Need help?
Do you have a question about the AP Dragster Launcher and is the answer not in the manual?
Questions and answers