Turn On/Off; Taring; Weighing - KERN CH Series Operating Manual

5.3

Turn on/off

Start-up
 Press the ON/OFF/TARE-key. The display lights up and the balance carries out a
selftest. The selftest is completed when the weight value 0.0 appears on the
display.
Switching Off
 Press the ON/OFF/TARE-key for a long time.
5.4

Taring

 Suspend preload.
Press the ON/OFF/TARE-button, the zero display appears. The weight of the
container is now internally saved.
 Weigh the material, the net weight will be indicated.
 After removing the preload weight appears as negative display.
 To delete the tare value, remove load from the suspended balance and press the
TARE button.
5.5

Weighing

 Load the suspended balance.
The weight value will be displayed at once.
Overload warning
Overloading exceeding the stated maximum load (max) of the balance, minus
a possibly existing tare load, must be strictly avoided. This could cause
damage to the balance.
Exceeding the maximum load is indicated by the display „E". Unload balance
or reduce preload.
18 CH-BA-e-1635