Vestamatic Rolltec Plus G/S Installation And Operating Instructions Manual

Vestamatic Rolltec Plus G/S Installation And Operating Instructions Manual

Roller shutter control

Advertisement

Rolltec Plus G/S
Roller Shutter Control
Art.-no. 01805050
Installation and Operating Instructions
Safety precautions
Ä
– Contact a professional electrician to install the control
as well as for setting of the DIP switches on the rear
panel of the device, because the power supply requires
a power supply of 230VAC, 50 Hz.
– Check the control system for signs of mechanical
damage after unpacking. If you notice any shipping
damage, do not start up the control system and notify
your supplier immediately.
– The control system should only be used for the purpose
specified by the manufacturer (refer to the operating
instructions). Any changes or modifications thereof are
not permissible and will result in loss of all warranty
claims.
– If the control unit cannot be operated without presenting
a hazard, it must be switched off and prevented from
being switched on unintentionally.
– When performing work on the windows, controls or
connected shades, protect them against unauthorised
or unintentional operation.
G
- 40 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Rolltec Plus G/S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vestamatic Rolltec Plus G/S

  • Page 1 Rolltec Plus G/S Safety precautions Ä – Contact a professional electrician to install the control Roller Shutter Control as well as for setting of the DIP switches on the rear panel of the device, because the power supply requires a power supply of 230VAC, 50 Hz.
  • Page 2: Table Of Contents

    Contents Contents Introduction General page 43 G/S functions General page 62 Manual mode page 44 Functional description broken glass sensor page 63 Automatic mode page 45 Functional description sun protection page 64 Setting the response (sun intensity) page 65 Programming General page 46 the basic...
  • Page 3: Manual Mode

    General Introduction Introduction Manual mode The delivery extent of the control includes the following items: The control features a selector switch with which manual mode (H) or automatic mode (A) can be selected. 1. Cover cap 2. Control Push the selector switch to (H), all the way to right until you hear the “click”, in order to activate the manual mode.
  • Page 4 Automatic mode Introduction Basic functions General Push the selector switch to (A), all the way to the left until you hear After the installation has been completed correctly (for instructions the “click”, in order to activate the automatic mode. please see pages 67 to 74), you can start programming. The automatic mode is now activated and the roller shutter will move up and down at the programmed times.
  • Page 5: The Basic Summer/Winter Time

    Summer/winter time Basic functions Basic functions Current time The display will indicate which time has been set. By operating the combination of set and time button you can set the current time. The (S) in the upper left hand corner of the display stands for summer time.
  • Page 6: Note

    Note Basic functions Basic functions Up time The control is delivered with the following manufacturer’s default up By operating the combination of set and up button you can set the and down times (day function is activated): up time. Daily up time –...
  • Page 7: Down Time

    Down time Basic functions Basic functions Random generator By operating the combination of set and down button you can set The random generator generates the so-called random time which the down time. causes the roller shutters to move up or down with a deviation of +/-15 min utes to the previously programmed times(*).
  • Page 8 Week function Special functions Special functions Astro function The week function enables you to program a particular up and down The Astro function is basically an electronical calendar. De pend ing time for each individual day of the week. on the stored sunrise and sunset times, the up or down times are In order to activate the week function, all DIP switches in the rear of automatically corrected under consideration of the geo graphi cal the housing must be set according to the table on page 61.
  • Page 9 Astro function Special functions Special functions Astro function Note: Activating the Astro function and setting the current calendar week will be performed in one programming step. If the up time is programmed before sunrise, the roller shutter moves up at sunrise. First press the set button and keep it pressed.
  • Page 10 Astro function /Run time correction Special functions Special functions Astro function – Germany Below the switching sequence is presented in the course of an entire year under con- DIP 2 DIP 3 DIP 4 DIP 5 Area sideration of summer/winter time, at an up time preset at 6 : 30 and a down time preset at 19 : 30.
  • Page 11: Astro Function - Europe

    Astro function – Europe Special functions Special functions Reverse function After the roller shutter has moved down automatically at the pro- DIP 2 DIP 3 DIP 4 DIP 5 Area grammed time, the reverse function causes the roller shutter to shortly move up shortly for airing purposes or to let pets go outside.
  • Page 12: Example For Dip Switch Setting

    Example for DIP switch setting Special functions G/S functions General The table below shows the various setting options. The position of S1 Your control features two additional useful functions: determines whether day or week function was selected. 1. Broken glass sensor (G) The function “broken glass sensor”...
  • Page 13: Functional Description Broken Glass Sensor

    Functional description broken glass sensor G/S functions G/S functions Functional description sun protection In case of broken glass, the roller shutter moves down without delay. When the lux sensor is exposed to sun rays, the sun symbol will flash in the display. After the sensor measures 1 minute of continuous sun- (0S8:0g0) shine, the roller shutter moves as far down to cover the lux sensor.
  • Page 14: Setting The Response (Sun Intensity)

    Setting the response (sun intensity) G/S functions Troubleshooting Set the response to the sun intensity with the potentiometer and the The roller shutter does not move up and down automatically. delivered adjustment tool. Carefully pull to remove the cover cap of the control.
  • Page 15: Installation Notes For Professional Electricians

    Notes for professional electricians Installation Installation Notes for professional electricians Ä WARNING! IMPORTANT! Risk of injury due to improper installation and commissioning. Parallel control of several roller shutter drive motors can Improper installation and commissioning may lead to personal injury only be implemented by means of isolating relays or group or property damage.
  • Page 16: Installation Instructions/Technical Data

    Installation instructions/Technical data Installation Installation Wiring diagram Power supply: 230VAC, 50 Hz Impulse voltage withstand level: 2.5 kV Rated power: Output: 230VAC, 50 Hz 250VAC, 3A, cos f > 0.8 ind. Maximum load: Align switching time: 120 seconds Software class: Operating temperature: 0 °C (32 °F) to +40 °C (104 °F) IP class:...
  • Page 17: Installation Broken Glass Sensor

    Broken glass sensor Installation Installation Broken glass sensor 3. Apply the adhesive to the side of the broken glass sensor that is marked with a black bar. IMPORTANT! Make sure to keep the adhesive areas clean and oil-free. 4. Place broken glass sensor carefully onto to the window pane and make sure to clear the window frame by minimum 2 inches.
  • Page 18: Installation Lux Sensor

    Lux sensor Installation Installation Lux sensor The additional function “sun protection” requires an extra lux sensor After completing the installation, activate the quick run function in for each control. The installation of the lux sensor is described below. order to check the additional function “sun protection” by pressing the time and day button simultaneously for 3 seconds (this will make the 1.
  • Page 19 Anschlussbild /Wiring diagram Übersicht Bedienungselemente/ Overview operating elements Rolltec Plus G/S Rolltec Plus G/S...
  • Page 20 Vestamatic GmbH Dohrweg 27 Druckfehler, Irrtümer und Änderungen vorbehalten! D-41066 Mönchengladbach Printing errors and details are subject to change without notification. info@vestamatic.com www.vestamatic.com © Vestamatic GmbH...

Table of Contents