Sony BKDM-7041 User Manual page 10

Digital Sketch Effects
8
3
Adjust the "Contour" parameters.
• Left knob ("Clip"): reference level for outline extraction (0
to 100%)
• Right knob ("Mix"): mix amount for input video (0 to
100%)
4
To apply a color to the outline portions, press F4 (EDGE
FLAT) or F5 (EDGE HUE ROT), turning it on, then adjust the
parameters.
For details of the parameter settings, see the section
"Selecting the border color or edge intensity" (page 4).
5
To apply a color or insert an image in the portions other than
the outlines, press one of F6 (CANVAS FLAT) to F8
(CANVAS FRM MEM), turning it on.
F6 (CANVAS FLAT): any single hue
F7 (CANVAS HUE ROT): a progressively changing hue
F8 (CANVAS FRM MEM): an image from frame memory
The color settings when you select F6 or F7 are the same as
for the outline portions. For details of the frame memory
selected by F8, refer to the BZDM-7020 User's Guide, or the
supplement to the BZDM-3020.
6
To interchange the outline portions and non-outline portions,
press F3 (NEGA).