Sony BKDM-7041 User Manual page 11

Applying a relief effect – F1 (SKETCH) to F4 (CHROMA
TYPE)
Use the following procedure.
1
Press F1 (SKETCH), turning it on.
2
Press F2 (MODE), to select "RELIEF".
The soft key indications appear as follows.
SKETCH MODE RELIEF
PATTERN
SKETCH menu soft key indications ("RELIEF" mode)
3
Adjust the "RELIEF" parameters.
• Left knob ("Ofst"): intensity level for relief (0 to 100%)
• Center knob ("Gain"): gain for relief (0 to 100%)
• Right knob ("Mix"): mix amount of relief pattern and
luminance signal of input video (0 to 100%)
4
To change the relief pattern, press F3 (RELIEF PATTERN).
Each time you press the button the way in which the light
impinges changes.
5
Select the chrominance signal for mixing with the relief.
VIDEO: input video image chrominance signal
FLAT COLOR: internally generated matte
6
Adjust the "Chroma" parameters.
When you selected "VIDEO":
• Left knob ("Gain"): chroma gain of input image (–100 to
+100%)
When you selected "FLAT COLOR":
• Center knob ("Sat"): saturation of "FLAT COLOR" (0 to
100%)
• Right knob ("Hue"): hue of "FLAT COLOR" (0 to 359.99
degrees)
CHROMA
TYPE
9