Download  Print this page

Sony BKDM-7041 User Manual page 9

Digital sketch effects board
Hide thumbs

Advertisement

3
Adjust the "Contour" parameters.
• Left knob ("Clip"): reference level for outline extraction (0
to 100%)
• Right knob ("Mix"): mix amount for input video (0 to
100%)
4
Adjust the "Chroma gain" parameters.
• Left knob ("Gain"): chroma gain of sketch image (–100 to
+100%)
5
To interchange the outline portions and non-outline portions,
press F3 (NEGA).
6
To apply a single hue to the outline portions, press F4 (EDGE
FLAT), turning it on, and to use a progressively changing hue
press F5 (EDGE HUE ROT), turning it on, then adjust the
parameters.
For details of the parameter settings, see the section
"Selecting the border color or edge intensity" (page 4).
Applying a drawing effect – F1 (SKETCH) to F8
(CANVAS FRM MEM)
Use the following procedure.
1
Press F1 (SKETCH), turning it on.
2
Press F2 (MODE), to select "DRAW1" or "DRAW2".
DRAW1: use a two-valued outline extraction signal.
DRAW2: use a continuous outline extraction signal.
The soft key indications appear as follows.
SKETCH
MODE
NEGA
SKETCH menu soft key indications ("DRAW1" or "DRAW2" mode)
EDGE
EDGE
CANVAS
FLAT
HUE ROT
FLAT
CANVAS
CANVAS
HUE ROT
FRM MEM
(Continued)
7

Advertisement

loading

  Also See for Sony BKDM-7041

  Related Manuals for Sony BKDM-7041