Audio Setting; Auxiliary Input; Sleep - Hama 00054821 Operating Instructions Manual

11.5 Audio setting

For some stations with a weak signal, quality can be
slightly improved by playing them in mono quality. You
can enable this function in the menu, and the radio will
automatically switch to mono reception when signal
quality is poor.
To change the audio setting, proceed as follows:

12. Auxiliary Input

Via the analogue audio input (AUX IN socket) you can
connect mobile devices (for example smartphone, tablet
PC, M3 player etc.) to the radio and play the audio files
using the radio´s speakers.
• From the main menu or after pressing [mode]
repeatedly, activate Auxiliary Input (Aux in) mode.
• Connect your mobile terminal device to the audio in (the
AUX IN socket) of the radio using a 3.5-mm TRS stereo
cable.
• Start and control audio playback using the controls of the
connected terminal device.
[menu]
Audio
setting
[menu]
Main menu

Auxiliary Input
28

13. Sleep

The radio has a sleep function, after a defined time the
radio switches to standby mode.
• Repeatedly press [SLEEP] on the remote control to set
the desired time interval (Sleep OFF/15/30/45/60/90/120
minutes)
Alternatively, set the time interval from the main menu
using [enter/navigate]:
• After the defined time the radio switches to standby
mode.
• Press [SLEEP] or [volume -/+]/ [
back on.
• If a time interval is already activated, you can change
or disable (Sleep OFF) it at any time by again pressing
[SLEEP] on the remote control.
Note - Backlight
There is a separate setting for the backlight when the
timer (snooze) is activated. For example, it can be set to
be dimmer than in normal operation.
15.8. Backlight
[menu]
Main menu

Sleep
], to turn the radio