Audio Setting; Auxiliary Input - Hama DIT2100MSBT Operating Instructions Manual

Favourites 1-30 (alternative to number keys)
• Press and hold [FAVORITES] approx. 3 seconds to save
a station on one of the 1-30 favourite station presets.
An overview window with the station presets should
open after approx. 2 seconds.
• You can switch between the station presets (1 to 30)
by pressing the favourite keys [+] / [-] (by turning
[preset]).
• Press [OK] ([navigation]) to save the station on the
desired station preset.
• To call up a favourite, briefly press [FAVORITES], select
the desired station preset by pressing the favourite keys
[+] / [-] (by turning [preset]) and confirm the selection
by pressing [OK] ([navigation]).
•

12.5 Audio setting

For some stations with a weak signal, quality can be
slightly improved by playing them in mono quality. You
can enable this function in the menu, and the radio will
automatically switch to mono reception when signal
quality is poor.
To change the audio setting, proceed as follows:

13. Auxiliary Input

Via the analogue audio input (AUX IN socket) you can
connect mobile devices (for example smartphone, tablet
PC, M3 player etc.) to the radio and play the audio files
using the radio´s speakers.
• From the main menu or after pressing [mode]
repeatedly, activate Auxiliary Input (Aux in) mode.
Alternatively, press [AUX] on the remote control to switch
directly to this operating mode.
• Connect your mobile terminal device to the audio in (the
AUX IN socket) of the radio using a 3.5-mm TRS stereo
[menu]
cable.
• Start and control audio playback using the controls of the
connected terminal device.
Audio
setting
27
[menu]
Main menu

Auxiliary Input