Table Of Contents - NETGEAR GS418TPP Hardware Installation Manual

Contents
Chapter 1 Introduction
Overview................................................................................................6
Features.................................................................................................7
Safety instructions and warnings........................................................8
Chapter 2 Hardware Overview
Hardware description........................................................................12
Front Panel..........................................................................................12
Back Panel...........................................................................................12
LEDs......................................................................................................13
Switch hardware interfaces...............................................................14
RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity..14
Reset button....................................................................................15
Factory defaults button.................................................................15
USB Port..........................................................................................15
Chapter 3 Installation
Step 1: Prepare the Site.....................................................................17
Step 2: Protect Against Electrostatic Discharge.............................18
Step 3: Unpack the Switch.................................................................19
Step 4: Install the Switch....................................................................20
Wall-Mount the Switch..................................................................20
Attach the switch to a rectangular pole or table leg.................21
Install the Switch in a Rack............................................................23
Install the switch on a flat surface.................................................24
Optional Step 5: Install SFP Transceiver Modules..........................25
Step 6: Connect Devices to the Switch............................................25
Step 7: Check the installation...........................................................26
Step 8: Apply AC Power and Check the LEDs................................26
Step 9: Manage the switch................................................................26
Chapter 4 Applications
Desktop Switching..............................................................................29
PoE Applications.................................................................................29
PoE overview..................................................................................30
Connect PoE Equipment for Surveillance and Security............30
3