Knowing Your Coolbot - Store It Cold CoolBot Instruction Manual And Troubleshooting Manual

During normal operation or after 20 seconds of inactivity the CoolBot goes into the
"Room Mode" by default and the display shows the current room temperature.
DISPLAY:
The display changes depending on which Mode indicator light is illuminated.
MODE INDICATOR LIGHT:
Shows which mode you are currently using.
Change modes by pressing the left or right arrows.
Room Mode: While in normal operation, the display shows the current room
temperature and the Room Mode indicator light is solid (no blinking).
Fins Mode: From the Room Mode, press the right arrow once to access the
Fins Mode. The light above "Fins" will turn on solid (no blinking). The display
will show the current fins' (A/C's coil) temperature.
Heater Mode: From the Room Mode, press the right arrow twice to access the
Heater Mode. The light above "Heater" will turn on solid (no blinking). The
display will show an "F" for Fahrenheit or a "C" for Celsius.
Program Mode: From the Room Mode, press the right arrow 3 times to access
the Program Mode. The light above "Program" will turn on solid (no blinking).
The display will show a number (e.g. 6.5), which will be the firmware version
on your CoolBot.
Rev: 2017 – 11A

KNOWING YOUR COOLBOT

©2017 Store It Cold, LLC
FIG. 1
3