Page 1
Western Electric Fireplace Insert Model Number: (EF42D, EF43D, EF44D, EF45D, EF302A) OWNER’S MANUAL Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so WARNING could result in fire, electric shock, or serious personal injury.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER customerservice@puraflame.com call: 844-377-5786...
Page 4
ALWAYS turn this heater off before unplugging it from the outlet. ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace. NEVER leave this heater unattended. ALWAYS unplug this heater when not in use. customerservice@puraflame.com call: 844-377-5786...
Page 5
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. SAVE THESE INSTRUCTIONS! customerservice@puraflame.com call: 844-377-5786...
Carefully check if any damages that may have for the spare parts. NOTE: Contact service team for help if there is any part missing or damaged. Email to customerservice@puraflame.com or call 844-377- 5786 during EDT 9:00 to 17:00 from Monday to Friday.
KEEP drapery and other furnishings at least 3ft /0.9m from the front and sides of the electric fireplace. AFTER installation, ensure that there is ≥0.004 ㎡ ventilation area between inside and outside of fireplace mantel. customerservice@puraflame.com call: 844-377-5786...
3) Recessed into a wall It is available to install the unit into a wall. The opening depth 8.1” is suggested for better ventilation. Build the opening according to the suggested specification shown below. customerservice@puraflame.com call: 844-377-5786...
Page 10
Prepare the opening and outlet, place the unit into the framed opening gently and no fixing brackets are needed. Note: If the existing opening is found a little bit narrow, the handles on both sides could be removed. customerservice@puraflame.com call: 844-377-5786...
WARNING! Do not operate the unit if it is damaged or has malfunctioned. If you suspect the unit is damaged, call a qualified service technician to inspect and replace any part of the electrical system if necessary. customerservice@puraflame.com call: 844-377-5786...
Turn the main power switch on. A long “beep” sound will be heard when the switch is turned at ON Position “I”. POWER SWITCH Note: The remote control will lost the memory for function settings when the switch is turned at OFF Position “O”. customerservice@puraflame.com call: 844-377-5786...
Page 13
‘clicks’ off. The thermostat THERMOSTAT will then maintain the room at this selected level. To increase the temperature, turn the rotary switch clockwise to a higher setting. customerservice@puraflame.com call: 844-377-5786...
This will turn off all functions and hold the settings in memory, press the power POWER button again will turn on the unit to previous settings. For the first time use, Flame A will be turned customerservice@puraflame.com call: 844-377-5786...
Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are, use a vacuum to clean the vent areas. With the Power Switch in the OFF position, plug the power cord back into the outlet. customerservice@puraflame.com call: 844-377-5786...
Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. customerservice@puraflame.com call: 844-377-5786...
Damage from use as a primary heat source; Other misuse or abuse not specifically listed herein. This product is not intended to be used as a primary heat source. It is for supplemental heating purposes only. customerservice@puraflame.com call: 844-377-5786...
2) Product has been used for some time: a. Confirm if the air outlet feels warm or there is something getting red inside when the heater is turned on. If yes, the fan is stuck or the heat customerservice@puraflame.com call: 844-377-5786...
Please contact service team for an instruction of removing the glass. The front trim is out of shape, the remote is missed or the log is broken. Please contact service team for a replacement and instruction. 9. SCHEMATIC DIAGRAM customerservice@puraflame.com call: 844-377-5786...
Page 20
Ningbo Richen Electrical Appliance Co., Ltd Address: No.19, Yongdinghe Road, Xiapu, Beilun, Ningbo PR. China www.puraflame.com 3.EF.43.05.456 A2...
Need help?
Do you have a question about the Western and is the answer not in the manual?
Questions and answers