Engine Oil Change; Air Cleaner - Zipper Mowers ZI-STE1100IV User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 20
12.3

Engine oil change

Unscrew the oil filler cap (3); tilt the machine and let the used oil run
into a suitable container.
Add new engine oil (15W40, 260ml) (2) and close the oil cap.
Clean it with a rag.
Put the machine on an even area and start the engine. If there is
sufficient oil level the oil-warning sensor (1) will be not activated.
12.4

Air cleaner

Loosen the screws and remove the air
cleaner cover (1)
Remove the air cleaner (2)
Clean the air filter with soapy water,
then rinse with clear water and let it
dry thoroughly before reassembling.
Reassemble the air cleaner in reverse
order
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-STE1100IV
N O T I C E
Waste oils are toxic and must not be released into the environment!
Contact your local authorities for information on proper disposal.
N O T I C E
Drain the used oil quickly and completely while the engine is still warm.
MAINTENANCE
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

9120039234120

Table of Contents