Table of Contents
Advertisement
2. If you need to scan longer documents, unfold the paper chute extension to
provide additional support for the documents.
3. Adjust the paper width slider for the paper size you are using. The paper width
slider should be gently touching both sides of the documents.
Attention
DO NOT load more than 20 sheets of paper
2
(70 g/m
, 18 lb.) to the ADF.
Paper scanned from the ADF must be a
minimum of 5.08 x 5.08 cm (2" x 2", W x L).
Make sure there are no gaps between the
document stack and the paper-width slider;
otherwise, the scanned images can be
skewed.
Although the documents should be loaded
firmly in place ensuring optimum scanning
accuracy, they should never be wedged in so
tightly that the process of feeding them
through the scanner is strained.
Do not load additional paper into the ADF
while the unit is feeding and scanning.
14
Advertisement
Table of Contents
