Table of Contents
Advertisement
Cleaning the ADF
1. Open the ADF cover by pulling the lever.
Cover open lever
ADF cover
2. Gently wipe the following areas with the cloth dampened with the non abrasive
cleaner. Be careful NOT to scratch their surfaces.
Clean Feed Roller:
Wipe the Feed Roller with the non abrasive cleaner dampened cloth from side
to side and then rotate it. Repeat this until its entire surface is cleaned.
Clean Pad Module:
Wipe the Pad Module with the non abrasive cleaner dampened cloth from top to
bottom (in the direction of arrow shown in below picture). Be careful not to
damage the pick springs of the pad.
21
Advertisement
Table of Contents
