Other Mobile Accessories - Yaesu FT-5200 Manual

.,
, - - - - - - - -
Warning
1
1
Never apply AC power to the power cable of the
transceiver. Never connect DC voltage of more
tha.n 15 volts to the power jack. When replacing the
1 .
1
fuse, use only a 15-Ajast-blow rype. Failure to
observe these precaurions
will
void the warranty.
l.
Mobile Power Connections
l
To minimize voltage drop and avoid blowing the car
fuses, connect the supplied DC cable directly to !he bat-
tery term.inals. Do not attempt to defeat or bypass the fuse
- it is there to prQ[ect you and the equiprnent.
Connect the RED power cable le ad to t..1e POSITIVE
( +)
battery tenninal, and t..1e BLACK lead to the NEG-
A T'NE ( -) [enninal. If you need to extend the power
cable use #14 AWG or larger insul:Hed, stranded cop-
per
wire.
Con.!1ect the cable to tr:msceiver only after
connecting to t..1e b:mery.
ExternaZ Speakers
qi
The dual speak.er capability of the FT-5200 lets you
monitor audio from each band from dtfferent directions
When operating mobile this way you can tell which band
01
a signa! is on wi.thout having to tak.e your eyes from the
q
road. Connecting one extemal speaker disables one band
in rhe transceiver's internai speaker (but audio for the
w
other band wiÙ continue to he heard from t..1e transceiv-
er). Connecting two external speakers disables the inter-
nai speaker enttrely, w1t..1 each providing the audio for
one band. The optional SP-7 E:r..temal Speak.er includes
its own swivel-type mounting bracket, and is available
from your Yaesu dealer. Of course the older SP-3, SP-4
or SP-55 Extemal Speakers rm.y also be used.
Other Mobile Accessories
Other options to enhance safety and mobile oper-
ating convenience are t..1e MW-1 Wireless Remote
Controller/DTMF Microphone, which duplicates the
front pane! controls and adds a DTMF keypad; the
YH-1 Headset and
~e
fu:l size MF-1A3B boom mi-
crophone with flexible arm (both use t..1e SB-10 PTT
sw1tch) allowing pracucally hands-free operation.
Base Station Installation
Operation from t..1e AC lme rey:uires a power supply
capable of providing at least 12A continuously at 13.8 V
DC. We recommend at least o ne extemal speak.er to tak.e
advantage of the audio separation of the bands. The FP-
700 AC power supply/loudspeak.er is available from your
Yaesu dealer to meet these needs. Use the DC power
cable supplied with the transceiver far making power
connections, and connect the external speaker cablc to
either speak.er jack on the relt panel.