Front Pane L Controls - Yaesu FT-5200 Manual

~
Il
Il
~
(l) Selector Knob
This 24-position detented rotary switch is used for
tuning, memory selection and most function settings.
The DWN an d UP keys on the microphone duplicate the
functions of this knob.
(2) Mai n Function Keys (with whlte labels)
These six keys select most of
the
major operating
features. If
the
button beeper is enabted, one or more
beeps
wiU
sound when a key is pressed, if the result-
ing
comrnand is
accepted. The white labels on the
keyfaces show the pnmary funcuon of each key.
However,
if
you press the
F/W
key frrst, these keys
will perform alternative functions indicared by the
blue la bel near each key (and descnbed
in
the Oper-
ation chapter).
For descriptive purposes
in
this manual, we referto
alternate key functions by preceding the alternate
key name with "F/W+" in front ofitto remind you to
press the F/W button frrst. Far example, "F/W+<IP"·
indicates that you should press the F/W button fol-
lowed by the
SUB
button (withln five seconds).
(3) VOL Conttol
This control adJUSts the volume of the receiver audio
(both receivers togetherif dual receiveis active), and
of the button beeper.
( 4) SQL Conttol
This cJntrol sets the threshold level at which a re-
ceived signal (or noise) opens the squelch and can
be
heard. Far maximum squelch sensitivity set this con-
tro! from counterclockwise just until noise
is
si-