Table of Contents
Advertisement
SAFETY MARK: This equipment is suitable for supplying power for welding operations carried out in
an environment with increased hazard of electric shock.
CYLINDER MAY EXPLODE IF DAMAGED:
correct shielding gas for the process used and properly operating regulators designed for the gas and
pressure used. Always keep cylinders in an upright position securely chained to a fixed support. Do
not move or transport gas cylinders with the protection cap removed. Do not allow the electrode,
electrode holder, work clamp or any other electrically live part to touch a gas cylinder. Gas cylinders
must be located away from areas where they may be subjected to physical damage or the welding
process including sparks and heat sources.
WARNING: Stability of the equipment is guaranteed only for an incline of maximum 10°
WARNING: Welding/cutting equipment must only be used for the purpose for which it is intended. It
must never be used for any other purpose, such as battery charging, thawing out frozen water pipes,
heating premises by the addition of heating elements, etc.
The manufacturer reserves the right to make changes and/or improvements in design without upgrade at the same time
the operator's manual.
English
Use only compressed gas cylinders containing the
4
English
Advertisement
Table of Contents
