Configure Vlan Acl Bindings - NETGEAR GS108Tv3 User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
7. To delete an IP ACL-to-interface binding, do the following:
a. Select the check box next to the interface.
b. Click the Delete button.
The binding is removed.
The following table describes the information displayed in the IP ACL binding table.
Table 73. IP ACL Binding Table
Field
Interface
Direction
ACL Type
ACL ID
Sequence Number

Configure VLAN ACL bindings

You can associate a MAC ACL, any type of IPv4 ACL, or an IPv6 ACL with a VLAN. When
you do so, the ACL is applied to all interfaces that are members of the VLAN.
Add a VLAN ACL binding
To add a VLAN ACL binding:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see Register and access the switch with your
NETGEAR account on page 34.
Manage Device Security
Cloud Management
Description
The interface.
The selected packet filtering direction for the ACL, which is always Inbound.
The type of ACL assigned to the selected interface and direction.
The ACL number or name identifying the ACL assigned to the selected interface and
direction.
The sequence number signifying the order of the specified ACL relative to other ACLs
assigned to the selected interface and direction.
404 User Manual