View Or Clear Eap And Eapol Statistics - NETGEAR GS108Tv3 User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Table 76. Detailed port statistics (continued)
Field
Excessive Collision Frames
Dropped Transmit Frames
STP BPDUs Received
STP BPDUs Transmitted
RSTP BPDUs Received
RSTP BPDUs Transmitted
MSTP BPDUs Received
MSTP BPDUs Transmitted
802.3x Pause Frames
Transmitted
EAPOL Frames Received
EAPOL Frames Transmitted
Time Since Counters Last
Cleared

View or clear EAP and EAPoL statistics

You can view information about Extensible Authentication Protocol (EAP) and EAP over LAN
(EAPoL) packets that are received on physical ports.
To view or clear EAP and EAPoL statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see Register and access the switch with your
NETGEAR account on page 34.
Monitor the Switch and the Traffic
Cloud Management
Description
The number of frames for which transmission on a particular interface fails due
to excessive collisions.
The number of transmit frames discarded at the selected port.
The number of STP BPDUs received at the selected port.
The number of STP BPDUs transmitted from the selected port.
The number of RSTP BPDUs received at the selected port.
The number of RSTP BPDUs transmitted from the selected port.
The number of MSTP BPDUs received at the selected port.
The number of MSTP BPDUs transmitted from the selected port.
The number of MAC control frames transmitted on the interface with an opcode
indicating the PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
The number of valid EAPoL frames of any type that were received by this
authenticator.
The number of EAPoL frames of any type that were transmitted by this
authenticator.
The elapsed time in days, hours, minutes, and seconds since the statistics for
the port were last cleared.
420 User Manual