Advertisement
Quick Links
Advertisement
Related Manuals for Zhermack ZETALABOR
Summary of Contents for Zhermack ZETALABOR
- Page 1 ZETALABOR USER’S GUIDE C-Silicone for masks...
- Page 2 Zetalabor, simplify your work Designed for the dental laboratory, the Zetalabor C-Silicone is characterised by high hardness and good mechanical properties. It can be used in various applications requiring For more than 35 years, its ease of use has helped...
- Page 3 MIXING TECHNIQUE Take one or more measures of Zetalabor Spread Zetalabor on the palm of your hand (note: the measuring spoon must be filled and impress the rim of the measuring spoon flush with the surface) onto the material as many times as...
- Page 4 Creation of a reinforced temporary restoration with injectable technique, starting with a model prepared on an impression with natural abutments prepared by the dentist. Materials used: Zetalabor, Acrytemp, Elite Rock. Master model CrCo structure for reinforced temporary restoration Waxed up structure...
- Page 5 Mask removal >> Once you have removed the wax, clean, rub and reposition the reinforcements on the model Mask repositioning End of Acrytemp injection and Acrytemp injection...
- Page 6 << Unfinished temporary restoration (following mask removal) FINAL RESULT after finishing and polishing...
- Page 7 INDIRECT TEMPORARY RESTORATIONS The creation of a temporary restoration enables the dentist to have a functional aesthetic support in the dental practice, before even preparing the abutments in the patient’s mouth. Materials used: Zetalabor, Acrytemp, Elite Rock. Model Zetalabor mask...
- Page 8 << Repositioning the mask onto the model and Acrytemp oozing out of the casting channels Mask removal FINAL RESULT after finishing and polishing...
- Page 9 WITH COLD-CURING RESIN FOR POURING TECHNIQUE The combined use of silicones and cold-curing resins for the preparation of framework prostheses saves plenty of time without foregoing quality. Materials used: Zetalabor, Villacryl SP, Elite Stone. Model with framework prosthesis Framework prosthesis on model and saddle...
- Page 10 Removal of wax and repositioning Repositioning the mask onto the model of teeth on the mask with framework prosthesis Weigh the resin, measure the monomer and mix, Mix and wait until you have pouring the monomer in first and then the resin a honey-like texture as shown...
- Page 11 Pour the resin Result after resin polymerization Mask removal Polishing and finishing FINAL RESULT...
- Page 12 The combined use of silicones and pouring resins makes it possible to create high-quality removable prostheses, saving significant amounts of time compared to the traditional technique which uses heat-curing resins. Materials used: Zetalabor, Titanium, Villacryl SP, Elite Stone. Master model with wax-up Addition of pouring channels and creation...
- Page 13 Base construction in Titanium to keep Mask removal the structure in a vertical position, marking of orientation points to check the correct repositioning of the silicone Wax removal from model and teeth Repositioning the teeth in the silicone mask...
- Page 14 Weigh the resin, measure the monomer and mix, Mix and wait until you have pouring the monomer in first and then the resin a honey-like texture as shown Reposition the mask and secure it in the correct Pour the resin into one of the position with an elastic band two pouring channels...
- Page 15 Result of the mask removal Polishing and finishing FINISHED PROSTHESIS „ This technique can also be used with Zetalabor only „ Add a central pouring channel if the palate thickness is extremely thin. In this case, pour the resin...
- Page 16 (compared with gypsum) and improved management of the prosthesis undercuts. Materials used: Zetalabor, Villacryl S. Prosthesis for repair Fixing the two parts of the prosthesis using sticky wax Measuring and mixing Zetalabor (4 measures) Creating the model in Zetalabor...
- Page 17 >> Remove the prosthesis from the silicone base and prepare the broken prosthesis PROSTHESIS Weigh the resin, measure the monomer and mix, pouring the monomer in first and then the resin REPAIR...
- Page 18 The creation of a silicone mask for the separation of teeth from the flask counter-mould makes it possible to save significant amounts of time during the prosthesis finishing process. Materials used: Zetalabor, Elite Stone, Elite Model. Master model with wax-up...
-
Page 19: Technical Features
1 x 5 kg can + 2 x 60 ml Indurent Gel tubes Indurent Gel - Gel catalyst for C-Silicones Code Packaging C100700 1 x 60 ml can Find out more about related Zhermack products for masks Acrytemp Elite Stones Villacryl S and SP Titanium Bis-acrylic self-curing resin for... - Page 20 Fulfilling your needs Zhermack S.p.A. | Via Bovazecchino, 100 | 45021 Badia Polesine (RO) ITALY T +39 0425 597611 | F +39 0425 53596 | info@zhermack.com | www.zhermack.com...
Need help?
Do you have a question about the ZETALABOR and is the answer not in the manual?
Questions and answers