24
Installation
3.2 Cable connection
3
disconnect switch
circuit breaker
A
to terminal b .
to terminal c .
B
specifications
At first, connect the ground wire to terminal b .
Then, make connections to the other terminals
one after another.
Install protection cover before turning on.
C Connecting the battery pack to the inverter.
Refer to the Installation Instructions for the
inverter to connect the power cable and
communication cable to the inverter.
self-discharge of battery during shipping and
storage.
D The switch-on process is described in Chap. 4.2 on page 28
CAUTION
a .