Advertisement
INSTALLATION INSTRUCTIONS
Connect the P-trap (not supplied) to the tailpiece.
Ensure all connections are watertight.
Remove the aerator by turning it counterclockwise. Use the supplied key if required for removal of your
aerator.
Open the drain. Turn on the water supply and check for leaks. Repair as needed.
Open both the hot and cold valves.
Run water through the spout for 1 minute to remove any debris.
Turn off the valves.
Reinstall the aerator. Retain the key for future use.
1133090-2-E
6 of 6
6. COMPLETE THE INSTALLATION
Aerator
Key
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Basin Set
Aerator
Advertisement
