Quick Start; Operating The Motorized Change-Over Switch Electrically; Remote Control; Locking Electrical Operation - ABB OTM_C Series Installation And Operating Instruction

3. Quick start

3. Quick start
This is a quick guide only meant for those who need a reminder of how to operate the unit. For more
detailed instructions, see chapter 6.
3.1 Operating the motorized change-over switch electrically;
remote control
To operate the motorized change-over switch electrically:
1. Remove the handle from the switch panel. You can remove the handle in all
positions (I, 0, II).
2. Turn the Motor/Manual selector to the Motor (M) position to enable electrical operation.
M M
M a n . M a n .
Figure 3.1

Operating the motorized change-over switch electrically; remote control

3.1.1 Locking electrical operation

To disable electrical operation, lock the locking latch with a padlock. After the locking latch has been
locked, the motorized change-over switch cannot be operated electrically. You can lock electrical
operation in all positions (I, 0, II).
Figure 3.2 Locking electrical operation
6 l 1SCC303002M0206 l ABB Installation and operating instructions, 34OTM_C rev. F
M M M M
M a n . M a n . M a n .
M M M M
M a n .
M a n . M a n .
1
2