Related Manuals for Vello LAG-MFT-CEF
Summary of Contents for Vello LAG-MFT-CEF
- Page 1 ACCELERATOR LENS ADAPTER User Manual LAG-MFT-CEF Canon EF Lens to Micro Four Thirds Mount...
- Page 2 THANK YOU FOR CHOOSING VELLO The Vello Accelerator Lens Adapter is for attaching Canon EF-mount lenses to Micro Four Thirds cameras. It allows a wider field of view on Micro Four Thirds sensors by magnifying the angle of view by 0.71×. This also provides an extra stop of light without decreasing image quality.
- Page 3 PRECAUTIONS • Avoid sandy or dusty • Do not use solvents such • Please read and follow environments when using as benzene, alcohol, or these instructions. Keep this adapter. detergents to clean the this manual in a safe adapter. place. •...
- Page 4 OVERVIEW Front Back Optical Camera Elements Canon lens mount alignment dot alignment Aperture toggle (Panasonic only) USB port Lens Release Micro Four Canon lens Tripod foot Thirds mount mount Hex screws 1/4-20 tripod socket...
- Page 5 CONTENTS • Vello LAG-MFT-CEF lens adapter for Canon EF Lenses to Micro Four Thirds Mount • Front and rear caps • Removable tripod foot • 2 mm hex key • Protective case • User manual...
- Page 6 MOUNTING THE LENS ADAPTER Note: Place the lens and 2. Line up the alignment camera on a stable, flat dots on the lens adapter surface when mounting or and the camera, and removing the Accelerator Lens carefully insert the lens Adapter.
- Page 7 3. Line up the alignment dot on the lens with the alignment dot on the lens adapter, and carefully insert the lens. Rotate the lens clockwise until it locks into place.
- Page 8 APERTURE CONTROL (PANASONIC ONLY) The aperture control toggle Press the toggle towards allows you to quietly open to close the aperture. and close the aperture without clicking a camera Press the toggle towards dial or rotating a lens ring. to open the aperture. Since it minimizes camera vibrations and noise, you can use it to change aperture...
- Page 9 REMOVING THE LENS ADAPTER 1. Turn the camera’s 3. Reattach the front lens power off. cap to the lens adapter. 2. Press and hold the 4. Press and hold the lens release pin on the release button on the lens adapter, and camera, and carefully carefully rotate the rotate the lens adapter...
- Page 10 REMOVING THE TRIPOD FOOT Use the included hex key to loosen the hex screws until the foot can be removed from the lens adapter. Note: If your lens has a built-in tripod collar, use the collar on the lens to mount the assembly to the tripod.
-
Page 11: Firmware Update
FIRMWARE UPDATE Go to vellogear.com to check for the latest available updates for your lens adapter. Use the USB port to connect the adapter to your computer, and follow the update instructions. -
Page 12: Specifications
SPECIFICATIONS Compatible Lenses Canon EF Compatible Cameras Micro Four Thirds Optical Design 4 elements in 4 groups Step-Down Amount 1 f-stop Angle-of-View Multiplier 0.71×... - Page 13 Lens Mount Canon EF Camera Mount Micro Four Thirds Tripod Thread 1/4-20 Dimensions (H × W × D) 2.95 × 2.79 × 0.95 in. (7.5 × 7.1 × 2.4 cm) Weight 4.2 oz. (119 g)
-
Page 14: One-Year Limited Warranty
ONE-YEAR LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. - Page 15 To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Vello along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
- Page 16 www.vellogear.com...