Commissioning The Wireless Receiver - Viessmann VITOTROL 100 Installation Instructions For Contractors

Commissioning the wireless receiver

Several Vitotrol 100 with wireless receiver can be installed in one building. Each pair
is matched in the factory. If several Vitotrol 100 with wireless receiver are fitted in one
building complex, never interchange a Vitotrol 100 and/or wireless receiver, as every
Vitotrol 100 is matched to the wireless receiver allocated to it.
Note
If display A flashes, the wireless receiver has not recognised the signal from the
Vitotrol 100. If this is the case, change the address code (see page 18).
Testing the strength of reception
A ON indicator
B Indicator/pushbutton for switching
contact
1. Press and hold Q on the wireless
receiver for approx. 5 s until ë
flashes.
2. Open the flap on the Vitotrol 100.
Vitotrol 100 operating instruc-
tions
3. Press å twice.
A
B
ON
8 A
OFF
C
ON
¸
Q
OFF
D
C Address recognition indicator/push-
button for service function
D Service function indicator
4. Select "Settings" with v/V.
5. Confirm with OK.
6. Select "Service" with v/V.
17