Specification - Viessmann VITOTROL 100 Installation Instructions For Contractors

Specification

Vitotrol 100
Rated voltage
Ambient temperature
■ during operation
■ during storage and transport
IP rating
Wireless receiver
Reception frequency
Rated voltage
Rated breaking capacity of the zero volt contact
Ambient temperature
IP rating
Protection class
Terminals suitable for the following cables
■ solid, single core cables
■ flexible cables
■ With each heat demand and draw-off
as well as cyclically every 20 min, the
clock thermostat transmits its data.
■ All switching data is saved in non-vol-
atile form in case of power failure.
No heat demand is executed during
power failure.
3 V–
2 batteries LR 6/AA
0 to 40 °C
-25 to 65 °C
IP 20 to EN 60529
868 MHz
230 V~ +/−10% 50 Hz
6(1) A, 230 V~
0 to 40 °C
IP 20 to EN 60529
II to EN 60730-1
up to 2.5 mm²
up to 2.5 mm²
19