Table of Contents
Advertisement
SAVE THESE INSTRUCTIONS
reduced physical, sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Cleaning
and user maintenance shall
not be made by children
without supervision.
8
DO NOT use the Quantum
X or accessories to unclog
drains. If sewer gas is drawn
into the Quantum X, it
could cause an explosion.
9
Never touch a metal sink,
cold or hot water pipe with
one hand while touching the
metal parts of any electrical
appliance, light fixture or
switch with the other hand.
Your body could complete
an electrical circuit with the
ground. Additionally, wet
skin surfaces can greatly
increase this hazard. DO NOT
handle the Quantum X or
accessories with wet hands.
2018-10-22 v18 color QX.indd 7
10
DO NOT plug any objects
into opening; Do not use with
any openings blocked; keep
free of dust, lint, hair, and
anything that may reduce
airflow; Keep hair, loose
clothing, fingers and all parts
of the body from opening and
moving parts; Use extra care
when cleaning on stairs.
11
DO NOT pick up anything
that is burning or smoking,
such as cigarettes, matches
or hot ashes. DO NOT use
to pick up flammable or
combustible liquids, such
as gasoline, or use in areas
where they may be present.
12
To avoid the possibility of
fire or explosion, do not use
Quantum X or accessories in
areas where flammable and/
or explosive vapor or dust is
present. Some cleaning fluids
can produce such vapors. Areas
where flammable cleaning
fluids have been used should be
completely dry and thoroughly
aired before being vacuumed.
7
22.10.2018 19:40:01
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Quantum X and is the answer not in the manual?
Questions and answers
How do I keep the top part stable with the bottom. It rolls all over making it very heavy.
Make sure the Quantum X is in the upright position. Press the foot release button to lock the handle in place, preventing it from rolling.
This answer is automatically generated
@Mr. Anderson my rolls all over when vacuuming tried lock did not work.
Why is the head light on the vacuum "flashing on/off" ??
Flashing headlights on the Quantum X vacuum may indicate an electrical issue or a blockage. Troubleshooting suggests checking for blockages, but if the vacuum is new and was only used once, it could be a faulty unit. If the problem persists, seeking professional help is recommended.
This answer is automatically generated
@Mr. Anderson , I check for blockages and didn't find any. But, the roller brush is no longer turning. It is not very clogged with long hairs. I cleaned the roller brush and it turns freely. It will not turn when the vacuum is on. Thank you for the help, Paul
I can not get the hose out of the vacuum
To remove the hose from the Quantum X vacuum, locate the back of the machine where the hose connects. Identify the notch on the hose connector—it must be aligned straight up and down to fit into the slot. To remove the hose, twist it to unlock, then pull it out.
This answer is automatically generated
I received the filter replacement but can’t get the cap off to take broken part off and replace with new screw cap
I'm trying to unscrew the bottom plate to take the brush out to clean. I think I screwed it up!!
To remove the bottom plate of the Quantum X to clean the brush, you need to take out all the screws on the bottom. Once the screws are removed, the bottom plate will come off, giving you access to the brush area for cleaning.
This answer is automatically generated
Tried to take off cap to insert vacuum hose but it wouldn’t budge, Actuallly, the two tabs to take it off both broke of. What do I do now. Do you have a replacement part for that part.
how do you clean the rotating bar of hair etc.? Can you take it out to clean it?
To clean the rotating bar (brush) on the QUANTUM X, do not remove the bottom panel, as doing so does not help with cleaning, can damage the vacuum, and voids the warranty. Instead, use small scissors and a comb to remove hair from the brush while it is still in place. The brush cannot be removed for cleaning.
This answer is automatically generated
My vacuum smells moldy when I turn it on. It made the whole room smell.
The QUANTUM X vacuum smells moldy when turned on because dust and debris clog the filters, which then blow out and recirculate into the air. After use, storing the warm vacuum in a dark closet creates a breeding ground for bacteria and viruses. These germs multiply, causing a stale, musty odor when the vacuum is used again.
This answer is automatically generated
I cant pull the hose out of the back
Hose is stuck