TABLE OF CONTENTS
Warnings.....................................................................................
Quantum X Unit..........................................................................
.............................................................................23
2018-10-22 v18 color QX.indd 3
......................................................................15
....................................................15
..........................................................15
....................................................16
..........................................................17
........................................................18
..................................................19
...............................................19
..........................................................20
................................................................21
...............................................21
..............................................23
.......................................................................24
..................................................................25
........................................................28
.............................................21
.............................22
............................................22
................................24
........................................31
5
6
10
10
11
13
14
3
22.10.2018 19:40:00
Need help?
Do you have a question about the Quantum X and is the answer not in the manual?
Questions and answers
How do I keep the top part stable with the bottom. It rolls all over making it very heavy.
Make sure the Quantum X is in the upright position. Press the foot release button to lock the handle in place, preventing it from rolling.
This answer is automatically generated
@Mr. Anderson my rolls all over when vacuuming tried lock did not work.
Why is the head light on the vacuum "flashing on/off" ??
Flashing headlights on the Quantum X vacuum may indicate an electrical issue or a blockage. Troubleshooting suggests checking for blockages, but if the vacuum is new and was only used once, it could be a faulty unit. If the problem persists, seeking professional help is recommended.
This answer is automatically generated
@Mr. Anderson , I check for blockages and didn't find any. But, the roller brush is no longer turning. It is not very clogged with long hairs. I cleaned the roller brush and it turns freely. It will not turn when the vacuum is on. Thank you for the help, Paul
I can not get the hose out of the vacuum
To remove the hose from the Quantum X vacuum, locate the back of the machine where the hose connects. Identify the notch on the hose connector—it must be aligned straight up and down to fit into the slot. To remove the hose, twist it to unlock, then pull it out.
This answer is automatically generated
I received the filter replacement but can’t get the cap off to take broken part off and replace with new screw cap
I'm trying to unscrew the bottom plate to take the brush out to clean. I think I screwed it up!!
To remove the bottom plate of the Quantum X to clean the brush, you need to take out all the screws on the bottom. Once the screws are removed, the bottom plate will come off, giving you access to the brush area for cleaning.
This answer is automatically generated
Tried to take off cap to insert vacuum hose but it wouldn’t budge, Actuallly, the two tabs to take it off both broke of. What do I do now. Do you have a replacement part for that part.
how do you clean the rotating bar of hair etc.? Can you take it out to clean it?
My vacuum smells moldy when I turn it on. It made the whole room smell.
I cant pull the hose out of the back
Hose is stuck