Server Chassis Features - Supero Dual Processor AS 1020C-3 User Manual

AS1020C-3 User's Manual
1-3

Server Chassis Features

The SC813TQ+-500 is our third-generation 1U chassis and features four hot-
swap SAS drive bays with SES2, a slim CD-ROM drive, a slim fl oppy drive and a
revolutionary cooling design that can keep today's powerful processors running
well below their temperature thresholds. The following is a general outline of the
main features of the SC813TQ+-500 chassis.
System Power
The SC813TQ+-500 chassis includes a single 500W cold-swap power supply.
Serial Attached SCSI (SAS) Subsystem
For the 1020C-3, the SC813TQ+-500 chassis was designed to support four SAS
hard drives that attach to a SES2 (SCSI Enclosure Services) backplane, which
provides drive status and monitoring functions. RAID 0, 1 and 10 levels are sup-
ported.
Note: The system's operating system must have RAID support to enable the hot-
swap capability of the SAS drives.
Control Panel
The control panel provides important system monitoring and control information.
LEDs indicate power on, network activity, hard disk drive activity and system over-
heat conditions. Also present are main power and system reset buttons.
I/O Backplane
The SC813TQ+-500 is a 1U rackmount chassis. Its I/O backplane provides one
full-height, half-length and one low profi le slot for PCI add-on cards, one COM port
(the other is internal), one VGA port, two USB ports, PS/2 mouse and keyboard
ports and two Ethernet (LAN) ports.
1-4