Installing The Server Into The Rack - Supero Dual Processor AS 1020C-3 User Manual

AS1020C-3 User's Manual

Installing the Server into the Rack

You should now have rails attached to both the chassis and the rack unit. The
next step is to install the server into the rack. Do this by lining up the rear of the
chassis rails with the front of the rack rails. Slide the chassis rails into the rack
rails, keeping the pressure even on both sides (you may have to depress the lock-
ing tabs when inserting). See Figure 2-3.
When the server has been pushed completely into the rack, you should hear the
locking tabs "click". Finish by inserting and tightening the thumb screws that hold
the front of the server to the rack.
Figure 2-3. Installing the Server into a Rack
2-6