Hercules DJ CONTROL MP3 E2 User Manual page 18

While the track on deck A is playing for the audience, press the headphone monitoring button on
deck B (the right-hand deck) so that you can hear the track you will be preparing on deck B on
your headphones while the audience continues to listen to the track being played on deck A over
the speakers in the room (assuming you have a multi-channel sound card that has been
configured for use with headphones in VirtualDJ, as described in chapter 5.3 Monitoring with
headphones). The headphone monitoring button on deck B lights up, indicating that deck B is
being monitored on your headphones.
- Step 1: While the track on deck A is playing, mute the EQ controls (Treble, Medium and Bass
knobs) on deck B.
- Step 2: As the track on deck A is nearing its end, start up playback on deck B and start moving
the cross fader towards the center.
- Step 3: While the tracks on both decks are playing, restore the EQ controls (Treble, Medium
and Bass knobs) on deck B.
- Step 4: Mute the EQ controls (Treble, Medium and Bass knobs) on deck A.
- Step 5: Move the cross fader all the way to the right, to deck B.
- Step 6: Restore the EQ controls (Treble, Medium and Bass knobs) on deck A, so that you
can prepare the next track to be played on deck A on your headphones; and so on.
The following diagrams give you an idea of how the Treble, Medium and Bass knobs and cross
fader are adjusted for the procedure described above.
Step 1: Mute the EQ controls
(Treble, Medium and Bass
knobs) on deck B.
18/34– User Manual
Step 2: Move the cross fader
to the center.
Step 3: Restore the EQ
controls (Treble, Medium and
Bass knobs) on deck B.