Advertisement
-
You can manually open and close the valve by pushing the actuator towards the ballvalve and turning it left or right 90º
(a visual check on the valves position can be done by checking the colour of the indicator:
RED = OPEN
-
You can change the position of the actuator on the valve by turning the actuator (see figure 1).
Note. This will influence the OPEN and CLOSE setting (OPEN will become CLOSE and CLOSE will become OPEN).
Note: On the 2" version (figure 2), you can manually open/close the valve by turning the knob on top of the actuator.
Power supply
Power consumption
Opening/closing time
Max. ambient temp.
Max. medium temp.
Max. pressure
IP rating
Manual override
Max. switching points
Min. switching point
Timer display
Timer battery live
USEFULL FEATURES
NONE or BLUE = CLOSED (See figure 1) (ONLY ON THE 1" VERSION)
Air-Saver 1" housing
Air-Saver 2" housing
TECHNICAL SPECIFICATIONS
115VAC or 230VAC (see label)
7W during the opening and closing of valve
30 seconds / 90º for the 1" version
105 seconds /90º for the 2" version
55ºC
100ºC
16 bar / 230 psi
IP 54
Yes
16 per day / 112 per week
1 minute
24 hrs
1-2 years expected, not guaranteed
Figure 1
Figure 2
4
Advertisement
