Advertisement
INSTALLATION
IMPORTANT NOTICE
Before installing this product make sure it complies with your request and that it suits your application!
CONNECTING THE UNIT TO YOUR PIPELINE
· Make sure that no solid matter (e.g. sealing compound residue) gets into the valve during the installation.
· Make sure that the pipeline is thoroughly clean.
· Use quality sealing compound only!
· Use a proper tool for fixing the valve! Never use the actuator as a lever (do NOT apply any force on the actuator part).
flow direction
flow direction
_______________________________________________________________________________________________________
· Motorised Ballvalves usually operate in any mounting position. We recommend, however, that the valve is mounted
according to these drawings.
______________________________________________________________________________________________________
· Minimum space required around the unit is 100 mm.
____________________________________________________________________
CONNECTING THE UNIT TO YOUR POWERSUPPLY
· Make sure that the supply voltage and frequency comply with those stated on the product.
· Grounding is required.
______________________________________________________________________________________________________
REMOTE WIRE CONNECTION DIAGRAMS:
NOTE:THE REMOTE SWITCHING WIRES ARE LIVE
WIRES AND CARRY 115VAC or 230VAC
2
Advertisement
