ViewSonic PJ862 Quick Start Reference Sheet page 3

SmartPanel Projector Driver Application Note
The hidden functions available for the ViewSonic with this Driver are as follows:
ADJ UP
ADJ DOWN
ADJ LEFT
ADJ RIGHT
D. Relays
The following table specifies the factory-preset
settings for the low-current relays found on the rear
of the SmartPanel. The Configuration Utility can
be used to customize these settings your installation.
Relay 1 ON Maintained
Relay 2 ON Momentary
Relay 3 OFF Momentary
Selection Momentary; not Binary
E. Other Presets
The following table specifies other default factory settings for this Driver that affect is control of the
Projector.
Power Status Feedback Method
Control Wiring Option
Control for the ViewSonic with this Driver is via both RS-232 and Infrared.
The following table specifies settings for the Panel's configurable timers. For more information on the
inactivity shutdown feature and the lockout timer see the SmartPanel Configuration and Installation
Guide.
Lockout Timer
Inactivity Shutdown
©2005 SP Controls Inc. 601 Minnesota Suite 115, San Francisco, CA 94107
MENU
MAGNIFY +
MAGNIFY -
MAGNIFY OFF
RS-232 Polling (see note 1)
Infrared Emitter (see note 2)
81 seconds (see note 3)
Disabled
BLANK
MUTE
FREEZE
AUTO IMAGE
RELAYS
PWR PWR PWR
ON ON OFF
MAINT. MOM. MOM.
help@spcontrols.com
ViewSonic PJ862
500mA MAX. CURRENT
SELECTION
(EXT. SWITCHER CTRL)
4 3 2 1