Related Manuals for ViewSonic PJL855
Summary of Contents for ViewSonic PJL855
- Page 1 PJL855 Office Theater User’s Guide 31" to 300" (Viewable) Super Bright SVGA LCD Projector...
-
Page 2: For Your Records
ViewSonic Corporation. The serial number of this product is on the bottom of the projector. Write the serial number in the space below and keep this guide as a permanent record of your purchase to aid in identification in the event of theft or loss. -
Page 3: Fcc Information
Do not damage the power cord by pulling, bending, heating, or placing heavy objects on it. Caution Following these instructions could prevent personal injury or damage to the projector. To prevent damage from heat build-up: • Clean the air filter after every 100 hours of operation. -
Page 4: Table Of Contents
Warranty ......... . 17 Customer Support ......back cover ViewSonic PJL855... -
Page 5: Getting Started
Getting Started Congratulations on purchasing a ViewSonic PJL855 Office Theater Save the original box and all packing material for future shipping needs. Package Contents • ViewSonic PJL855 Office Theater • Remote Control Unit/Mouse & Laser Pointer • 2 AA batteries •... -
Page 6: Connecting Input/Output Devices
AUDIO IN AUDIO ViewSonic ViewSonic PJL855 S-VIDEO IN RGB IN VIDEO IN AUDIO IN CONTROL RGB OUT MONO RGB IN CONTROL RGB OUT AUDIO IN AUDIO ViewSonic S-VIDEO IN VIDEO IN AUDIO IN MONO Getting Started... -
Page 7: Operation
FOCUS ring (see page 7). Positioning the Projector The projector must be horizontal to get a distortion-free picture. Place the projector on a table-top or other flat surface. Use the chart below to determine the placement of the projection screen. -
Page 8: Controls And Indicators
ViewSonic PJL855 are used to magnify part of projected picture MAGINIFY buttons when mote Control illustration erson's eyes.Back View of point the laser light at any emote Control Unit mitted from the Laser Aperture of the look directly at the laser light to factory setting). -
Page 9: Adjusting The Projected Image
8-10) Select the menu.To select one of the four menus, press the left or right MENU buttons on the Projector Control Panel or the DISK PAD on the Remote Control Unit. The name of the selected menu is highlighted in green. -
Page 10: Set Up Menu
VIDEO signal input. How to use the SET UP menu Use the MENU buttons on the projector (or DISK PAD on the Remote Control Unit) to move the cursor to the item you want to adjust. For bar display items (VOLUME, BRIGHTNESS, CONTRAST, COLOR BALANCE) you must make adjustments manually using the on-screen controls (see illustration to the right). -
Page 11: Input Menu
(using the BLANK button on the Remote Control Unit). Turns on-screen message on/off (When MESSAGE turned on, VOLUME level is indicated on- screen) Operation VIDEO options Returns to factory settings Inverts picture horizontally Inverts picture vertically and vertically ViewSonic PJL855... -
Page 12: Option Menu
NOTE: Computer control of the projector (communication function) is an advanced feature that requires specialized software not included with the PJL855. To develop this software you will need various control codes and other suplementary information availaible from ViewSonic Customer Support. (See the back of this guide for contact information.) -
Page 13: Technical Information
13.8" (W) x 4.2" (H) x 13.2" (D) 351mm (W) x 406mm (H) x 437mm (D) 12.4" (W)x 16.0" (H) 17.2"(D) 4.5 kg (9.9 lb) 9.0 kg (19.8 lb) UL, c-UL, FCC-A, CE, CB Report,BCIQ, CCIB, C-Tick, T 250W : 56-85Hz üv ViewSonic PJL855... -
Page 14: Timing Chart
Timing Chart The following table lists the maximum refresh rates that the ViewSonic PJL855 will operate at a number of standard resolutions (timing presets). While the projector is capable of this level of performance, not all video cards are capable of operating at these signal timings. See your graphics card user's guide to ensure compatibility. -
Page 15: Troubleshooting
Replace the lamp unit now. The power will turn off after 10 minutes. No signal input is detected. Check all cable connections to all input devices. Check to make sure the input signal (Horizontal and Vertical frequency) is within the range supported by the projector. See page 13. TEMP Indicator Meaning... -
Page 16: Problem Solving Chart
Mouse cable was connected not working (using Remote after the power was turned on Control Unit as a mouse) RGB signial was not selected ViewSonic PJL855 (Check this before contacting Customer Support) Possible Cause Recommended Action Turn Main Power Switch ON... -
Page 17: Maintenance
NOTE: If sufficient dust, etc. collects in the air filter, a protection circuit in the projector will automatically turn off the power. To prevent this from occurring, make sure you clean the air filter every 100 hours. -
Page 18: Warranty
How long the warranty is effective: The ViewSonic PJL855 Office Theater projector is warranted for three (3) years for all parts excluding the lamp, three (3) years for all labor, and ninety (90) days for the lamp from the date of the first consumer purchase. -
Page 19: Customer Support
Customer Support ViewSonic 381 Brea Canyon Road Walnut, CA 91789 Tel (909) 869-7976 Tel (800) 688-6688 07/99 Fax (909) 468-1202 Country/ Telephone/Fax Region United States T: (800) 688-6688 service.us@viewsonic.com F: (909) 468-1202 www.viewsonic.com/support Canada T: (800) 688-6688 service.ca@viewsonic.com F: (909) 468-1202 www.viewsonic.com/support ®...
Need help?
Do you have a question about the PJL855 and is the answer not in the manual?
Questions and answers