Attaching The Vesa Mounting Bracket - HP 25x User Manual

Attaching the VESA mounting bracket

A VESA mounting bracket is included with the monitor for use when attaching the monitor head to a wall,
swing arm, or other mounting fixture.
1. Remove the monitor stand. See
2. Insert the VESA mounting bracket into the slot on the back of the monitor head's hinge (1), and then
install the two screws (2) to secure the bracket.
3. To attach the monitor head to a swing arm or other mounting device, insert four mounting screws
through the holes on the mounting device and into the screw holes on the VESA mounting bracket.
IMPORTANT:
wall or swing arm.
Removing the monitor stand on page
Follow the mounting device manufacturer's instructions when mounting the monitor to a
10.
Setting up the monitor 11