Entering User Modes - HP 25x User Manual

Table A-2 Preset display resolutions (continued)
Preset display resolutions
1920 × 1080 @ 160 Hz
1920 × 1080 @ 200 Hz
1920 × 1080 @ 240 Hz

Entering user modes

Under the following conditions, the video controller signal may occasionally call for a mode that is not preset:
You are not using a standard graphics adapter.
●
You are not using a preset mode.
●
If this occurs, you may need to readjust the parameters of the monitor screen by using the OSD. Your changes
can be made to any or all of these modes and saved in memory. The monitor automatically stores the new
setting, and then recognizes the new mode just as it does a preset mode. In addition to the factory preset
modes, at least eight user modes can be entered and stored.
26 Appendix A Technical specifications